We Have The Best Deals On Cafeteria Tables in the Industry.
Here are some specifications for most models.
Tables fold and open in one fluid motion, assisted by a combination of cylinders and a torsional energy storage system.
This combination ensures safety and ease of use through a controlled, effortless operation. The cafeteria table stays in a teepee position for easy handling.
TOPS AND BENCHES
Table tops and benches are made of solid core warp-resistant construction. High-pressure laminate face is used for
the top surface with a balanced high pressure laminate backer for the bottom surface.
Table tops and benches are attached to the table frame with deep thread screws. The corners have a 1-1/2″ radius. The Bench supports are robotically welded steel construction of 14-gauge tubular frame steel with 6″ square, heavy-duty 11-gauge steel plates welded to uprights. The Benches are secured to steel plates with deep thread
screws. No field assembly required.
Stool supports are robotically welded steel construction consisting of a 14-gauge tubular frame with 6″ square, heavy-duty 11-gauge steel plates welded to uprights.
Stools are one of the following:
A. Poly: High-impact polypropylene stools
B. Thermoset Hard Plastic:
Table top and bench edges are finished in one of the following:
A. Bullnose edge: (Flat vinyl T-edge) Edges are banded with an abrasion-resistant vinyl bullnose molding.
B. 73P Edge: Edges are banded with a 2mm flat PVC (polyvinyl chloride) edge banding that is chemically bonded to the table or bench core.
C. Perfect Edge: Made of 1/4″ thick by 3/4″ high cast black polyurethane. The Perfect Edge is mechanically and chemically bonded to the table core and chemically bonded to the laminate surface edge
The Table frames are fabricated using a welded unitized construction, integrating all structural steel members into a self-supporting unit. The table top support apron is 11-gauge channel steel, pierced to securely anchor the tops.